Kaltis Temperature Recorder

• A 6"(15.2cm) circular chart, 7 day circular chart recorder, using pressure-sensitive chart paper. One box of 50 charts is included.
• NEW: Digital recorder now available.
• Temperature recorders should be factory fitted, but can also be retro-fitted.

Click HERE to contact us for more information.

Kaltis Digital Temperature Recorder

• 4digit, 5 Section LCD display.
• Temperature + Platinum RTD :Pt 100 385 ohm
• CH1-Built-in temperature sensor.
• CH2-RTD input temperature measurement.
• USB or RS232 interface: Cable & window software.
• Battery Life: 1 year(Measuring rate:15min).
• Simple installation. Can be retrofitted.
• Input Frequency measurement: 10-Seconds to 59-Minute Intervals.
• Resolution: 0.1, Accuracy:+/- 0.1% Reading +0.5°C.(18°C ~ 28°C)
• Low cost, User-friendly,
• Compact size: Only 8.6 x 4.5 x 2.5cm

Click HERE to contact us for more information.

Back-Up System

Backup systems inject LCO2 or LN2 when the internal cabinet temperature warms up to a pre-set level.

• Back up systems are available for both Prime and Merit series. These can be factory fitted, or retro-fitted.
• Liquid flow is automatically shut off when the freezer door or lid is opened.
• All parameters are fed back to, and controlled by the freezer controller
• Activation set points are lower than the high alarm setting.
• The system operates from a rechargeable battery, and includes all hardware except the gas supply cylinder.

Click HERE to contact us for more information.

Remote Phone Alarm (RPA)

Multiple freezers can be connected. High/low alarm and power failure events are communicated by telephone.

• Built in backup battery: Also dials a phone number on power failure.
• Setting by normal key pad phone

Click HERE to contact us for more information.

GSM Remote Phone Alarm

Control and monitor via GSM mobile telephone, no distance limitation.

Features

• Control/Alarm/Monitor via GSM mobile phone, with no distance limitation. User can control/monitor/alarm their device from over the world.
• 4 Relay and one alarm relay output.
• 8 Switch input, normal open, close alarm.
• Setting Input switch alarm (close alarm) to enable or disable via SMS.
• Relay output On/Off setting via SMS.
• Dot matrix LCD display shows Analog input value, Switch input and Relay output status.
• All setting values are saved to an EPROMIC with no data loss.
• The status of the switch input and relay output can be checked remotely at any time.
• Can default two telephone no., alarm SMS can be send to two users.
• Dual band GSM mobile modem.
• After an SMS command has been sent, this will be confirmed by a return SMS.
• Intelligent application, innovation, wide range, no limitation.

Click HERE to contact us for more information.